Roll Tooling for Existing Tishken Machine

Formtek recently supplied new roll tooling for a precut HVAC structural shape for an existing Tishken machine.  The unique tooling design is capable to form a seam, similar to a lockseam, utilizing precut material, a feat not common for these types of applications, in galvanized, primed, mild carbon steel and stainless steel material.  For more information, www.tishken.com, contact tishken@formtekgroup.com or call (216) 292-4460.

NEW - Tishken XHS Slitter Redesign with Roll-a-Head

Tishken recently updated its Slitting System designs for producing narrow coils widths in high production and frequent changeover environments.  To maximize productivity and support the sensitive knife setups of narrow mult slitting, the systems offer Tishken’s Roll-a-Head feature for efficient change of the slitter head inline, reducing downtime.   Unlike turret-type systems, with the Roll-a-Head design, the tooling can be setup and gapped offline, then quickly rolled inline and secured via the hydraulic transfer and clamping system.  The systems are available with single or multiple recoilers and the option of oscillate winding.  To further support the specialty slitting applications, the system includes a job memory for storing the speeds and drive settings of each knife setup, to optimize production and minimize scrap.

Tishken designs and builds specialized production systems for roll forming and coil metal processing.   For more information, contact sales@formtekgroup.com , call (216) 292-4460 or visit www.tishken.com

Tishken Edger

Tishken recently supplied MD Metals, Bedford Park, IL with a STR-40 Tishken Edging System.   The system can process strip up to 4” wide and up to ¼” thick., featuring two banks of edging rolls as well as a combination edging/de-cambering section that and can produce a variety of edge types.  The line is capable of producing de-cambered and leveled cut-to-length strips as thin as 1/16” and as narrow as ½” wide.

Tishken Edging Systems for ferrous and non-ferrous materials are available with Recoiling and CTL models at widths of up to 12” and thicknesses up to ½”, and can also be retrofitted into existing coil processing lines.  For more information, contact tishken@formtekgroup.com or call (216) 292-4460.

Tishken Slitting System for Bearing Steel

Tishken recently supplied a 12-XHS Slitting system for producing narrow coils used in the manufacture of sleeve bearings.  With a maximum 12” incoming coil width, the slitter head was sized to produce 42 cuts of 0.237” wide mults in 0.059” thickness material.  In order to support such particular knife setups, the slitting system includes Tishken’s Roll-a-Head feature for efficient change of the slitter head inline, reducing downtime.   Unlike turret-type systems, with the Roll-a-Head design, the tooling can be setup and gapped offline, then quickly rolled inline and secured via the hydraulic transfer and clamping system.  Additionally, the 12-XHS System includes dual recoilers for wrapping burr up and burr down coils on separate mandrels, each with a non-contact overarm separator for the surface critical material.  To further support the specialty slitting application, the system includes a job memory for storing the speeds and drive settings of each knife setup, to optimize the production and minimize scrap.

Tishken designs and builds specialized production systems for roll forming and coil metal processing.   For more information, contact sales@formtekgroup.com , call (216) 292-4460 or visit www.tishken.com

Roll Tooling for Existing Tishken Machine

Formtek recently supplied new roll tooling for a precut HVAC structural shape for an existing Tishken machine.  The unique tooling design is capable to form a seam, similar to a lockseam, utilizing precut material, a feat not common for these types of applications, in galvanized, primed, mild carbon steel and stainless steel material.  For more information, www.tishken.com, contact tishken@formtekgroup.com or call (216) 292-4460.

A Merry Christmas from Formtek

From all of us at Formtek, may the good times and treasures

of the present become the golden memories of tomorrow.

Wishing you all a Merry Christmas.

Formtek US Builders Featured Article

Formtek has a featured story in the 2012 Fall V edition of US Builders Review that we hope will interest you. You can view the High-Tech Forming Equipment article on pages 75 thru 77. We invite you to take a look......the link is provided below.

From all of us at Formtek, we wish you a Happy Thanksgiving.

http://bit.ly/UkLIWG